Sustainable Design of Research Laboratories: Planning, Design, and Operation
This price is valid for United States. Change location to view local pricing and availability.
Other Available Formats: Hardcover
Chapter 1 Introduction.
Access to Environment.
Metrics / Rating / Scorecards - Why Use Them?
ASHRAE Standard 189.
Focus on Energy and Carbon.
Chapter 2 Integrated Design: Working Collaboratively to Achieve Sustainability.
Introduction to Integrated Design.
Planning and Integrated Design Process.
Assembling the Team.
Traditional Sequential Design vs. Integrated Simultaneous Design.
Project Tasks in an Integrated Design Process.
Research / Evaluation.
Criteria / Loads.
Orientation and Massing.
External Solar Controls.
High Performance Glazing.
Integrated Design and Building Information Modeling (BIM).
Smithsonian Tropical Research Institute Research Station.
Water and Waste.
Design for Adaptability to Future Uses.
Chapter 3 Programming: Laying the Groundwork for a Sustainable Project.
Laboratory Module and NSF/Scientist.
Building and Floor Plate Efficiency.
Program Space for Sustainable Operations.
Reduce the Frequency and Scope of Renovations.
Temperature and Relative Humidity.
Hours of Operation.
Plumbing and Process Piping.
Chapter 4 Site Design: Connecting to Local and Regional Communities.
General Principals of Sustainable Site Design.
Choosing and Appropriate Site.
Site Assessment Study - Part 1.
Site Assessment Study - Part 2.
Designing a Project to Fit Sustainably on a Site.
Lab Specific Site Design Considerations.
Stormwater Management Techniques.
Below Grade Stormwater Storage Chambers.
Pervious Pavements in Action.
Case Study: Boston University Medical Center, BioSquare III, Boston, MA.
Site Design Strategies.
Case Study: AstraZeneca, R&D Expansion, Waltham, MA.
Site Design Strategy.
Case Study: Arnold Arboretum at Harvard University, Weld Hill Research and Administration Building, Jamaica Plain, MA.
Geo-Thermal Well Field Design Challenges.
Chapter 5 Laboratory Performance: Simulation, Measurement and Operating Characteristics.
Laboratory Energy Estimation Basics.
Energy Modeling Protocols.
Life-Cycle Cost Analysis.
Metering for the Sustainable Laboratory Building.
Introduction to Metering.
What to Meter?
Components of a Metering System.
Metering for the Multi-Tenant Laboratory Building.
Metering in Federal Government Laboratories.
The Laboratory Building Dashboard.
Measurement and Verification.
Introduction to M&V.
The M&V Plan.
M&V Analysis Approach.
Metering to Support M&V.
Comparison of Measured and Forecasted Loads.
Dealing with Uncertainty in M&V.
Preparation of the M&V Report.
Laboratory Building Commissioning.
Chapter 6 Engineering Systems: Reducing What Goes In and What Comes Out.
Mechanical and Electrical Demand Reduction.
Heating and Cooling Load Profiling.
Supply Airflow Required to Offset the Cooling Load.
Supply Air Required for Lab Dilution.
Supply Air Needed to Makeup Air to Exhaust Elements.
Lab Driver Characterization.
Perimeter Lab Calculation Example (Interior and Envelope Loads).
Interior Lab Calculation Example (Internal Heat Gains Only).
Reducing Airflow Demand in Load-Driven Labs.
Reducing Demand with Envelope Improvement.
Reducing Demand Caused by Equipment Heat Gain.
Reducing Demand in Hood-Driven Labs.
Reducing Demand in Air Change-Driven Labs.
Energy-Efficient Systems to Meet the Demand.
Variable Air Volume Operation.
Laboratory Air System Control Technology.
Air Distribution Efficiency.
Underfloor Air Distribution (UFAD).
Glycol Runaround Exhaust Air Energy Recovery.
Heat Pipe Exhaust Air Energy Recovery.
Exhaust Air Energy Recovery by Energy Wheels.
Comparison of Energy Recovery Technologies.
Low Pressure-Drop Air Distribution.
Increase Return Air from Labs.
Passive-Evaporative Downdraft Cooling.
Radiant Heating Systems.
Internal Ventilation Requirements and Design Considerations.
Air Exhaust and Intake Design Considerations.
Exhaust Stack Design.
Exhaust Treatment and Emission Reduction.
Low-Energy Cooling and Heating.
Heat Pump Systems.
Chilled Water Distribution.
Ice Storage and Non-Electric Cooling Technologies.
Optimum Chiller Configuration.
Lake Source Cooling Water.
High Efficiency Condensing Boilers.
Heat Recovery from Boilers.
Active Solar Heating and Cooling.
Power Generation and Renewable Energy.
Biomass-Fueled Power Generation.
Landfill-Derived Methane Fueled Generation.
Carbon Neutral Laboratory Buildings.
Carbon Footprint Reduction.
Corporate Carbon Emission Initiatives.
Laboratory Water Conservation.
Laboratory Water Demand and Consumption.
Sustainable Water Systems.
Water Supply Concepts.
Waste System Concepts.
System Cleaning and Testing.
Chapter 7 Indoor Environment: The Health and Happiness of Building Occupants.
Learning from Corporate Workplace Trends.
Costs and Returns.
Indoor Air Quality.
Contaminants During Construction.
Contaminants from Material Offgassing.
Contaminants from Occupancy.
Chemical Safety / Chemical Dispensing.
Separation / Compartmentalization.
Limited Quantity Usage - Dispensing / Centralized Storage.
Thermal Comfort / Occupant Control.
Access to Exterior Environment / Daylight.
Daylighting in Buildings.
Shaping the Building For Daylighting - Conclusions.
Lighting Design for Laboratories.
Luminaire and System Component Selection.
Integrated Approach to Lighting Design.
Lamp Efficiency and Related Selection Considerations.
Lighting Design Strategies.
Design Impacts on Lighting.
Daylighting and Daylight Harvesting.
Laboratory Lighting Controls.
Connections Between Acoustical Considerations and Sustainable Design for Laboratories.
Architectural Acoustics Design.
Acoustical Materials for Laboratories.
Chapter 8 Materials: What is the Sustainable Lab Made Of.
Introduction - What Makes Materials Sustainable?
Material Reuse / Refurbishment / Downcycling.
Recycled Content and Recyclability of Materials.
Harvesting Practices and Transportation.
Healthy Materials VOCs, Low?Toxicity.
Sustainable Material Sources.
What is Different About Laboratory Materials?
Material Selection Metrics.
Cradle to Cradle.
Living Building Challenge.
BRE Green Guide to Specifications.
FRP and PVC Panels.
Reinforced Epoxy Wall Coatings.
High Performance Coatings.
Chapter 9 Renovation and Leasing: Alternative Approaches to New Construction.
Converting Existing Buildings to Laboratory Use.
Benefits of Converting an Existing Building to Laboratory Use Compared to New Construction.
Conserving Embodied Energy and Reducing Waste.
Adaptive Reuse and LEED.
Characteristics of a Suitable Existing Building for Conversion to Laboratory Use.
Evaluation of an Existing Building for Conversion to Laboratory Use.
Case Study Examples.
NIBRI, Cambridge, MA.
University of DE Brown laboratory - Newark, DE.
Gene Logic - Gaithersburg, MD.
640 Memorial Drive - Cambridge, MD.
Leasing Laboratory Space in Multi-Tenant Buildings.
Sustainability Issues Unique to Multi-Tenant Buildings.
The Landlord’s Motivation.
The Tenant’s Motivation.
Identifying Grants and Rebates.
The LEED Green Building Rating System.
Case Study Examples.
670 Albany Street at BioSquare, Boston, MA.
Renovating Previously Occupied Laboratory Space.
Chapter 10 Conclusion.