JNCIA: Juniper Networks Certified Internet Associate Study Guide: Exam JN0-201
- Assessment testing to focus and direct your studies
- In-depth coverage of official test objectives
- Hundreds of challenging practice questions, in the book and on the CD
Authoritative coverage of all test objectives, including:
- Working with the JUNOS software
- Implementing Juniper Networks boot devices
- Troubleshooting Routing Information Protocol
- Implementing a routing policy
- Configuring and monitoring an OSPF Network
- Implementing Border Gateway Protocol
- Monitoring and troubleshooting an IS-IS network
- Understanding the Reverse Path Forwarding process
- Operating firewall filters
- Using Multiprotocol Label Switching
Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Introduction. Assessment Test. Chapter 1 The Components of a Juniper Networks Router. Chapter 2 Interfaces. Chapter 3 Protocol-Independent Routing. Chapter 4 Routing Policy . Chapter 5 The Routing Information Protocol (RIP). Chapter 6 Open Shortest Path First (OSPF). Chapter 7 Intermediate System to Intermediate System (IS-IS). Chapter 8 Border Gateway Protocol (BGP). Chapter 9 Multicast. Chapter 10 Firewall Filters. Chapter 11 Multiprotocol Label Switching (MPLS). Glossary. Index.
Do you think you've discovered an error in this book? Please check the list of errata below to see if we've already addressed the error. If not, please submit the error via our Errata Form. We will attempt to verify your error; if you're right, we will post a correction below.
3rd Sentence Should read: "To assist you in making this transition, let's examine some details of the router's output."
"since your interaction with the Packet Forwarding Engine is through the CLI" Should read: "... since your interaction with the Packet Forwarding Engine is limited through the CLI and the JUNOS software."
Answer 6 Second sentence should read "Scrambling and FCS Value are physical properties."
Near bottom of page, the route prompt should show "user@Merlot"
First router configuration line should read "user@Merlot"
Automatic summarization - Should read: "This occurs due to the classful nature of RIP as described above."
Should read: "... and injects it into the appropriate area."
First sentence should read: "The Cabernet and Shiraz routers are EBGP peers in AS 10 and AS 20, respectively."
Should read: "... and finally arrived in the local AS 64999."
Should read: "Assuming a local AS number of 64999, in our earlier ..."
Please change 0x01:11:01 into 0x01:10:01
Also change 0x01:00:5E:01:11:01 into 0x01:00:5E:01:10:01
Should read: "The default action for an LSR is to copy the IP TTL ..."
Should read: "The interval is changed on Chardonnay's so-0/0/2.0 interface (10.100.60.2) to 20 seconds:"
Discussing Aggregated Routes the book specifies that the most precise summary available to fit this criterion is 192.168.0.0/17 it should read 192.168.0.0/18.
Text output that is included in figure 7.8 -Please change the router capture output from"hold time 9" to "hold time 27".
Answer 17 Please change "192.168.0.0 /17" to "172.16.0.0 /17".