Materials Science and Technology (MS&T) 2006, Volume 2, Materials and Systems
This price is valid for United States. Change location to view local pricing and availability.
This is a Print-on-Demand title. It will be printed specifically to fill your order. Please allow an additional 5-6 days delivery time. The book is not returnable.
Processing of Advanced High Strength Steels, Welding and Coating.
Effects of Composition & Processing in Cold-Rolled, Dual-Phase Steels for Automotive Applications (N. Pottore, I. Gupta, and R. Pradhan).
Effect of New Ferrite on Strength – Ductility Balance of a High Strength Water Quenched Dual Phase Sheet Steel (O. Yakubovsky, and M. Kapustin).
Deformation Behavior of Dual-Phase Steels Under Various Loading Conditions; Mechanisms Leading to Failure (A. Karelova, C. Krempaszky, E. Werner, P. Tsipouridis, E.Tragl, and A. Pichler).
Experimental Analysis of the Influence of Specimen Geometry on the Tensile Hopkinson Split Bar Test Results of Sheet Steels (S. Curtze, M. Hokka, V-T. Kuokkala, and T. Vuoristo).
Comparison of Final Properties and Microstructures between Conventional TRIP and Tempered Martensite Assisted Steels (TMAS) (J. Vikram, A.M. Elwazri, E. Essadiqi, and S. Yue).
Effect of Strain Rate and Temperature on the Mechanical Behavior of TRIP and TWIP Steels in Tension and Compression (M. Hokka, S. Curtze, V.-T. Kuokkala, T. Vuoristo, and P. Peura).
Low-Cycle Fatigue Properties of TRIP Steel (L.T. Robertson, T.B. Hilditch, and P.D. Hodgson).
Effect of Redundant Strain on Flow Behavior and Transformation Temperatures in Nb–Microalloyed Steel (J. Vikram, A.M. Becerra, F. Zarandi, and S. Yue).
Product Physical Metallurgy and Mechanical Behavior of Multiphase Steels.
Strength and Fatigue of Laser Butt Welds for IF, HSLA, and Dual Phase Sheet Steels (B. Yan, and M. Gallagher).
Spot Friction Welding of High Strength Automotive Steel Sheets (M.P. Miles, J. Sederstrom, K. Kohkonen, R. Steel, S. Packer, T. Pan, W.J. Schwartz, and C. Jiang).
A Research Study on the Production of Advanced High Strength Steels to Heavy Chassis of FH 12 Applied in Auto Structural Parts for the Optimization of Auto
Fuel Performance (Sh. Pourmostadam).
Microstructure and Properties of Rapid Heat Treated and Galvanized Dual Phase Steel (R. Fourmentin, A. Mertens, and J.R. McDermid).
Influence of Chemical Composition on the Microstructure and Mechanical Properties of Multiphase TRIP-Assisted Steels, Processed Using Thermal Cycles Compatible with Continuous Hot-Dip Galvanizing (A. Mertens, and J.R. McDermid).
A New Generation of Tool Steels for Shaping AHSS and UHSS (B. Casas, D. Marco, and I. Valls).
High Strength Cold Drawn Seamless Steel Tubes with Improved Toughness at Low Temperature in Transverse Direction (E.P. Bagliani, E. Altschuler, M. Solano, A. Pessina, and P. Marchetti).
Materials and Devices for Energy Harvesting, Generation and Storage Systems.
Materials and Devices for Energy Harvesting.
Comparative Study of Piezoelectric Materials for Power Scavenger (D. Shen, J. Ajitsaria, J.-G. Lee, S.-Y. Choe, and D.-J. Kim).
Magnetic Shape Memory Alloys and Its Application in Actuators (S. Mahendrakar, and K.S. Vinay).
Energy Generation and Storage Systems.
Tensile Properties of Super Alloys for Components in Hydrogen Generation Systems (R.S. Koripelli, J. Pal, and A. Venkatesh).
Materials and Processes for Energy Generation.
Fabrication of Nanoscale Amide/Imide Particles by Bulk Mechanical Alloying (B. Chen, X. Zhu, C. Zhang, B. Kerbs, and L. Li).
Materials for Responsive Space Access.
Precipitation in Al-Zn-Mg-Cu Alloys Modified with Sc and Zr during Aging (M.R. Shaghiev, S.V. Senkova, and O.N. Senkov).
Phase-Field Modeling of Microstructural Evolution during Solidification in Al-Sc Alloys (Y.H. Wen, E.S.K. Menon, and C. Woodward).
Nanocomposites - Their Science, Technology and Applications.
Potential Contributions of Nanotechnology to the Electric Power Industry (J. Stringer, R.H. Richman, P. Chou, and S. Rosinski).
Biological Properties of Carbon-Metal Nanocomposite Thin Films (C. Jin, M.L. Morrison, P.K. Liaw, C.J. Berry, R.L. Brigmon, L. Riester, M. Andara, A. Agarwal, C.-C. Shih, C.-M. Shih, S.-J. Lin, Y.-Y. Su, and R.J. Narayan).
Sintering Mechanism of Composite Nanoparticle and Its Application to Bonding in Electronics (T. Yamaguchi, E. Ide, A. Hirose, and K.F. Kobayashi).
Carbon Nanotube Composites.
A Novel Process of CNTs-Al2O3 Nanocomposite Ceramics (Y. Guo, H. Cho, Y. Song, J. Abot, and D. Shi).
Precursor Derived SiC-Carbon Nanotube Composites (S.F. Bartolucci, and E. Bongio).
Deformation Mechanisms and Toughening in Carbon Nanotube-Reinforced Polycarbonate Matrix Composites (J. Robbins, and B.S. Majumdar).
Polymeric Based Nanocomposites.
Effect of Processing Conditions on the Structure of Polymer Nanocomposites (Q. Yuan, A. Raina, and R.D.K. Misra).
Enhancement of Electrical and Thermal Conductivity of Conductive Coatings and Adhesives by Addition of Nanometer Sized Particles (A. Pachamuthu, A. Rae, and D. Santos).
Effect of Melt Processing Conditions on the Degree of Mixing and Properties in Alumina/Poly(Ethylene Terephthalate) Nanocomposites (D. Kim, J.S. Lee, C.F. Barry, and J.L. Mead).
Metallic Based Nanocomposites.
Mechanical Behavior of Multiphase Nanocrystalline Materials (C.C. Koch, R.O. Scattergood, and K.L. Murty).
Deformation-Induced Synthesis of Nanoscale Heterogeneous Microstructures (R.J. Hebert, and J.H. Perepezkoi).
Characterization and Comparison of Aluminum 2-Phase Composites Consisting of Micrometric and Nanometric Ceramic Second Phases Consolidated by Explosive, Shock-Wave Compaction (N.G. Alba-Baena, L.E. Murr, A. Loya-Puga, W. Salas, R.M. Arrowood, and D.E. Bujanda).
Spark Erosion Synthesis of Titanium Nanocrystalline Carbides (A. Satyvaldiev, G. Nasirdinova, E. Dronov, and U. Asanov).
Nanomaterials: Science and Technology.
Industrial Development and Application of Nanomaterials.
Yield Strength of Nanoparticulate Titania Via Compaction (N. Venugopal, and R.A. Haber).
Nanotubes, Nanorods, Nanowires and Other One-Dimensional Structures.
Electrical Gas Sensor Characterization of Individual Tin Oxide Nanowires Contacted by Focused Ion Beam Techniques (F. Hernández-Ramírez, A. Tarancón, O. Casals, E. Pellicer, A. Romano-Rodríguez, J.R. Morante, S. Barth, and S. Mathur).
Silicon Carbide Nanowires Synthesized by a Current Heating of a Silica-Graphite Rod (T. Jintakosol, Y. Gogotsi, and P. Singjai).
Growth of Boron Nitride Nanowires by Microwave Plasma CVD (L. Guo, and R.N. Singh).
Synthesis and Processing of Nanostructures and Nanocomposites, Part II.
A New Route to Electrical Perovskite Lead Titanate from Lead and Titanium.
Glycolates Via Sol-Gel Process (N. Tangboriboon, A. Jamieson, A. Sirivat, and S. Wongkasemjit).
Self-Assembly, Arrayed and Nanoporous Materials.
Study on Nano-Tubular Halloysite (D. Li, and X. Wang).
Functional Behaviour and Characterization of Nanomaterials.
Carbon Nanotube and Alumina Nanoparticle Suspension and Freeze Casting Study (K. Lu).
Simulations of Nanomaterials and Their Properties.
Contact Structure Formation in Carbon Nanotube Electronic Devices and Its Effect on Electron Transport (W. Luo, K. Ravichandran, W. Windl, and L.R.C. Fonseca).
Geometric and Electronic Structure of Silicon Nanowires (C. Berkdemir, and O. Gülseren).
Mechanism of the Influence of Ultradispersed Diamonds on Formation of the Structure of Ion-Beam Ni and Cr Coatings (M.A. Andreyev, A.Ph. Ilyuschenko, and L.V. Markova).
Synthesis and Characterization of Nano Size La0.67Ca0.33MnO3 CMR Material by PVA Chemical Route (D.C. Krishnaa, G. Venkataiaha, S. Ram, and P.V. Reddy).
Nanostructured Materials: Synthesis, Characterization and Applications.
I: Electrochemical Synthesis.
II: Characterization of Nanostructures.
Synthesis and Properties of Nickel-Rich Oxide Nanowires (S. Thorne, Y. Bhargava, V. Radmilovic, and T. Devine).
Image-Based Nanocrystallography in Three Dimensions by Means of Transmission Electron Goniometry with Free On-Line Database Support (P. Moeck, and P. Fraundorf).
Growth of Nano-Grained Indium Thin Films and Their Optical Properties (J.-H. Park, and D.-J. Kim).
Growth of Hydroxyapatite onto Nanotubular TiO2 for Bio-Implantation Applications (A. Kar, K.S. Raja, and M. Misra).
Synthesis and Characterization of Barium Strontium Titanate Nanofibers Via Electrospinning (J. Yuh, and W.M. Sigmund).
The Influence of Cation Concentration on DNA Attachment to Beta-Gallia Rutile
Surfaces (N. Empie, and D. Edwards).
Synthesis of Nanoparticles and Nanostructured Films I.
Aluminum Powder Production from Gibbsite Using a Non-Transferred Arc Thermal Plasma Reactor (J.C. Gomez, E.N. Labrador, E.E. Vidal, and P.R. Taylor).
Synthesis and Characterization of Nanoparticles of Yttrium Barium Hafnium Oxide by a Single Step Modified Combustion Route (J.K. Thomas, and H. Padmakumar).
Synthesis and Characterization of the Semiconducting Nanomaterials of Gr V-VI for Thermoelectric Applications (J.R. Ota, and S.K. Srivasta).
Sosman Program I.
Grain Boundary Dynamics in Nanograin Superplasticity, Grain Growth and Sintering (F. Wakai).
Synthesis of Nanoparticles and Nanostructured Films II.
Broad Band Optical Characterization of Sol-Gel TiO2 Thin Film Microstructure Evolution with Temperature (S. Phadke, J.D. Sorge, S. Hachtmann, and D. Birnie, III).
Novel Anti-Corrosion Nano-Sized Ceramic-Based Thin Films Prepared by Sol-Gel Method for Aluminum Alloys (A.S. Hamdy, and D.P. Butt).
Selected Applications of Nanostructured Materials in Buildings (H. Schmid).
Development of Novel Cobalt-Doped Amorphous Silica Composite Membranes for Hydrogen Separation at High Temperatures (H. Mori, T. Nagano, S. Fujisaki, T. Sumino, and Y. Iwamoto).
Use of Ceramics, Glass and Other Materials in the Disposition of Nuclear and Hazardous Wastes.
Recycling of Municipal Waste Slag Using Phase Separation of Glass (T. Imaoka, S. Sakida, T. Nanba, and Y. Miura).
Nuclear Waste Processing.
Recent Process and Equipment Improvements to Increase High Level Waste Throughput at the Defense Waste Processing Facility (DWPF) (M.E. Smith, A.B. Barnes, J.R. Coleman, R.C. Hopkins, D.C. Iverson, R.J. O’Driscoll, and D.K. Peeler).
Overview of Testing to Support Processing of Sludge Batch 4 in the Defense Waste Processing Facility (C.C. Herman).
Actinide Stabilization and Low Temperature Waste Forms.
Nanotechnology for Uranium Separations and Immobilization (K. Barber, A.W. Apblett, S. Al-Fadul, A. Piquette, and M. Chehbouni).
Grout Waste Form for the Disposition of Idaho HLW Calcine (R.A. Palmer, B.M. Kauffman, W.D. Patterson, Y. Xia, C.A. Williams, C.S. See, T.C. Leone, M. Bricka, A. Marwaha, and A. Herbst).