Mechanics of Materials 2e
May 2010, ©2011
1.2 Normal Stress Under Axial Loading.
1.3 Direct Shear Stress.
1.4 Bearing Stress.
1.5 Stresses on Inclined Sections.
1.6 Equality of Shear Stresses on Perpendicular Planes.
Chapter 2 Strain.
2.1 Displacement, Deformation, and the Concept of Strain.
2.2 Normal Strain.
2.3 Shear Strain.
2.4 Thermal Strain.
Chapter 3 Mechanical Properties of Materials.
3.1 The Tension Test.
3.2 The Stress-Strain Diagram.
3.3 Hooke’s Law.
3.4 Poisson’s Ratio.
Chapter 4 Design Concepts.
4.2 Types of Loads.
4.4 Allowable Stress Design.
4.5 Load and Resistance Factor Design.
Chapter 5. Axial Deformation.
5.2 Saint-Venant’s Principle.
5.3 Deformations in Axially Loaded Bars.
5.4 Deformations in a System of Axially Loaded Bars.
5.5 Statically Indeterminate Axially Loaded Members.
5.6 Thermal Effects on Axial Deformation.
5.7 Stress Concentrations.
Chapter 6 Torsion.
6.2 Torsional Shear Strain.
6.3 Torsional Shear Stress.
6.4 Stresses on Oblique Planes.
6.5 Torsional Deformations.
6.6 Torsion Sign Conventions.
6.7 Gears in Torsion Assemblies.
6.8 Power Transmission.
6.9 Statically Indeterminate Torsion Members.
6.10 Stress Concentrations in Circular Shafts Under Torsional Loadings.
6.11 Torsion of Noncircular Sections.
6.12 Torsion of Thin-Walled Tubes: Shear Flow.
Chapter 7 Equilibrium of Beams.
7.2 Shear and Moment in Beams.
7.3 Graphical Method for Constructing Shear and Moment Diagrams.
7.4 Discontinuity Functions to Represent Load, Shear, and Moment.
Chapter 8 Bending.
8.2 Flexural Strains.
8.3 Normal Strains in Beams.
8.4 Analysis of Bending Stresses in Beams.
8.5 Introductory Beam Design for Strength.
8.6 Flexural Stresses in Beams of Two Materials.
8.7 Bending Due to Eccentric Axial Load.
8.8 Unsymmetric Bending.
8.9 Stress Concentrations Under Flexural Loadings.
Chapter 9 Shear Stress in Beams.
9.2 Resultant Forces Produced by Bending Stresses.
9.3 The Shear Stress Formula.
9 .4 The First Moment of Area Q.
9.5 Shear Stresses in Beams of Rectangular Cross Section.
9.6 Shear Stresses in Beams of Circular Cross Section.
9.7 Shear Stresses in Webs of Flanged Beams.
9.8 Shear Flow in Built-Up Members.
Chapter 10 Beam Deflections.
10.2 Moment-Curvature Relationship.
10.3 The Differential Equation of the Elastic Curve.
10.4 Deflections by Integration of a Moment Equation.
10.5 Deflections by Integration of Shear-Force or Load Equations.
10.6 Deflections Using Discontinuity Functions.
10.7 Method of Superposition.
Chapter 11 Statically Indeterminate Beams.
11.2 Types of Statically Indeterminate Beams.
11.3 The Integration Method.
11.4 Use of Discontinuity Functions for Statically Indeterminate Beams.
11.5 The Superposition Method.
Chapter 12 Stress Transformations.
12.2 Stress at a General Point in an Arbitrarily Loaded Body.
12.3 Equilibrium of the Stress Element.
12.4 Two-Dimensional or Plane Stress.
12.5 Generating the Stress Element.
12.6 Equilibrium Method for Plane Stress Transformation.
12.7General Equations of Plane Stress Transformation.
12.8 Principal Stresses and Maximum Shear Stress.
12.9 Presentation of Stress Transformation Results.
12.10 Mohr’s Circle for Plane Stress.
12.11 General State of Stress at a Point.
Chapter 13 Strain Transformations.
13.2 Two-Dimensional or Plane Strain.
13.3 Transformation Equations for Plane Strain.
13.4 Principal Strains and Maximum Shearing Strain.
13.5 Presentation of Strain Transformation Results.
13.6 Mohr’s Circle for Plane Strain.
13.7 Strain Measurement and Strain Rosettes.
13.8 Generalized Hooke’s Law for Isotropic Materials.
Chapter 14 Thin-Walled Pressure Vessels.
14.2 Spherical Pressure Vessels.
14.3 Cylindrical Pressure Vessels.
14.4 Strains in Pressure Vessels.
Chapter 15 Combined Loads.
15.2 Combined Axial and Torsional Loads.
15.3 Principal Stresses in a Flexural Member.
15.4 General Combined Loadings.
15.5 Theories of Failure.
Chapter 16 Columns.
16.2 Buckling of Pin-Ended Columns.
16.3 The Effect of End Conditions on Column Buckling.
16.4 The Secant Formula.
16.5 Empirical Column Formulas—Centric Loading.
16.6 Eccentrically Loaded Columns.
Appendix A Geometric Properties of an Area.
A.1 Centroid of an Area.
A.2 Moment of Inertia for an Area.
A.3 Product of Inertia for an Area.
A.4 Principal Moment of Inertia.
A.5 Mohr’s Circle for Principal Moments of Inertia.
Appendix B Geometric Properties of Structural Steel Shapes.
Appendix C Table of Beam Slopes and Deflections.
Appendix D Average Properties of Selected Materials.
Answers to Odd Numbered Problems.
- Major update to WileyPLUS course, adding more homework problems, GO problems and tighter integration with MecMovies.
- Added additional content/pedagogy to link MecMovies more tightly with the book.
- Updates to art program to improve consistency in labeling and improved viewing.
- Added coverage of discontinuity functions.
- New examples added across most chapters.
- MecMovies examples more integrated with the text and WileyPLUS course.
- Revised 40% of end of chapter problems
- Added additional homework problems, approx. 150 new problems across all chapters.
- Communicating visually- The illustrations use color, shading, perspective, and dimension to clearly convey concepts while striving to place these concepts in the context of real world components and objects. These illustrations have been prepared by an engineer to be used by engineers to train future engineers.
- MecMovies-The text integrates computer based instruction into the traditional textbook format with the addition of the MecMovies instructional software.
- Problem-solving schema- The textbook and software include a number of multimedia features aimed at helping students organize and categorize the Mechanics of Materials concepts and problem-solving procedures.
- Style and clarity of examples- To a great extent, the Mechanics of Materials course is taught through examples, and consequently, this textbook places great emphasis on the presentation and quality of example problems. The commentary and the illustrations associated with example problems are particularly important for the learner. The commentary explains why various steps are taken and describes the rationale for each step in a solution process while the illustrations help build the mental imagery needed to transfer the concepts to differing situations.
- Homework philosophy- This textbook includes over 1080 homework problems in a range of difficulty suitable for learners at various stages of development. Problems have been designed with the intent of building the technical foundation and skills necessary for success in subsequent engineering design courses. The problems are intended to be challenging but at the same time practical and pertinent to traditional engineering practice.
- Wiley E-Texts are powered by VitalSource technologies e-book software.
- With Wiley E-Texts you can access your e-book how and where you want to study: Online, Download and Mobile.
- Wiley e-texts are non-returnable and non-refundable.
- WileyPLUS registration codes are NOT included with the Wiley E-Text. For informationon WileyPLUS, click here .
- To learn more about Wiley e-texts, please refer to our FAQ.
- E-books are offered as e-Pubs or PDFs. To download and read them, users must install Adobe Digital Editions (ADE) on their PC.
- E-books have DRM protection on them, which means only the person who purchases and downloads the e-book can access it.
- E-books are non-returnable and non-refundable.
- To learn more about our e-books, please refer to our FAQ.