Skip to main content

Introduction to Electromagnetic Compatibility, 2nd Edition

Hardcover

£147.00

*VAT

Introduction to Electromagnetic Compatibility, 2nd Edition

Clayton R. Paul

ISBN: 978-0-471-75500-5 February 2006 1016 Pages

E-Book
£132.99
Hardcover
£147.00
O-Book
Download Product Flyer

Download Product Flyer

Download Product Flyer is to download PDF in new tab. This is a dummy description. Download Product Flyer is to download PDF in new tab. This is a dummy description. Download Product Flyer is to download PDF in new tab. This is a dummy description. Download Product Flyer is to download PDF in new tab. This is a dummy description.

Description

A Landmark text thoroughly updated, including a new CD

As digital devices continue to be produced at increasingly lower costs and with higher speeds, the need for effective electromagnetic compatibility (EMC) design practices has become more critical than ever to avoid unnecessary costs in bringing products into compliance with governmental regulations. The Second Edition of this landmark text has been thoroughly updated and revised to reflect these major developments that affect both academia and the electronics industry. Readers familiar with the First Edition will find much new material, including:
* Latest U.S. and international regulatory requirements
* PSpice used throughout the textbook to simulate EMC analysis solutions
* Methods of designing for Signal Integrity
* Fortran programs for the simulation of Crosstalk supplied on a CD
* OrCAD(r) PSpice(r) Release 10.0 and Version 8 Demo Edition software supplied on a CD
* The final chapter on System Design for EMC completely rewritten
* The chapter on Crosstalk rewritten to simplify the mathematics

Detailed, worked-out examples are now included throughout the text. In addition, review exercises are now included following the discussion of each important topic to help readers assess their grasp of the material. Several appendices are new to this edition including Phasor Analysis of Electric Circuits, The Electromagnetic Field Equations and Waves, Computer Codes for Calculating the Per-Unit-Length Parameters and Crosstalk of Multiconductor Transmission Lines, and a SPICE (PSPICE) tutorial.

Now thoroughly updated, the Second Edition of Introduction to Electromagnetic Compatibility remains the textbook of choice for university/college EMC courses as well as a reference for EMC design engineers.

An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Buy Both and Save 25%!

This item: Introduction to Electromagnetic Compatibility, 2nd Edition

Advanced Modeling in Computational Electromagnetic Compatibility (Hardcover £149.00)

Cannot be combined with any other offers.

Original Price:£296.00

Purchased together:£222.00

save £74.00

*VAT

Buy Both and Save 25%!

This item: Introduction to Electromagnetic Compatibility, 2nd Edition

Electromagnetic Compatibility Engineering (Hardcover £115.00)

Cannot be combined with any other offers.

Original Price:£262.00

Purchased together:£196.50

save £65.50

*VAT

Buy Both and Save 25%!

This item: Introduction to Electromagnetic Compatibility, 2nd Edition

Electromagnetic Fields, 2nd Edition (Hardcover £176.00)

Cannot be combined with any other offers.

Original Price:£323.00

Purchased together:£242.25

save £80.75

*VAT

Buy Both and Save 25%!

This item: Introduction to Electromagnetic Compatibility, 2nd Edition

Practical Electromagnetics: From Biomedical Sciences to Wireless Communication (Hardcover £157.00)

Cannot be combined with any other offers.

Original Price:£304.00

Purchased together:£228.00

save £76.00

*VAT

Preface xvii

1 Introduction to Electromagnetic Compatibility (EMC) 1

1.1 Aspects of EMC 3

1.2 History of EMC 10

1.3 Examples 12

1.4 Electrical Dimensions and Waves 14

1.5 Decibels and Common EMC Units 23

Problems 43

References 48

2 EMC Requirements for Electronic Systems 49

2.1 Governmental Requirements 50

2.2 Additional Product Requirements 79

2.3 Design Constraints for Products 82

2.4 Advantages of EMC Design 84

Problems 86

References 89

3 Signal Spectra—the Relationship between the Time Domain and the Frequency Domain 91

3.1 Periodic Signals 91

3.3 Spectrum Analyzers 142

3.4 Representation of Nonperiodic Waveforms 148

3.5 Representation of Random (Data) Signals 151

3.6 Use of SPICE (PSPICE) In Fourier Analysis 155

Problems 167

References 175

4 Transmission Lines and Signal Integrity 177

4.1 The Transmission-Line Equations 181

4.2 The Per-Unit-Length Parameters 184

4.3 The Time-Domain Solution 204

4.4 High-Speed Digital Interconnects and Signal Integrity 225

4.5 Sinusoidal Excitation of the Line and the Phasor Solution 260

4.6 Lumped-Circuit Approximate Models 283

Problems 287

References 297

5 Nonideal Behavior of Components 299

5.1 Wires 300

5.2 Printed Circuit Board (PCB) Lands 312

5.3 Effect of Component Leads 315

5.4 Resistors 317

5.5 Capacitors 325

5.6 Inductors 336

5.7 Ferromagnetic Materials—Saturation and Frequency Response 340

5.8 Ferrite Beads 343

5.9 Common-Mode Chokes 346

5.10 Electromechanical Devices 352

5.11 Digital Circuit Devices 357

5.12 Effect of Component Variability 358

5.13 Mechanical Switches 359

Problems 369

References 375

6 Conducted Emissions and Susceptibility 377

6.1 Measurement of Conducted Emissions 378

6.2 Power Supply Filters 385

6.3 Power Supplies 401

6.4 Power Supply and Filter Placement 414

6.5 Conducted Susceptibility 416

Problems 416

References 419

7 Antennas 421

7.1 Elemental Dipole Antennas 421

7.2 The Half-Wave Dipole and Quarter-Wave Monopole Antennas 429

7.3 Antenna Arrays 440

7.4 Characterization of Antennas 448

7.5 The Friis Transmission Equation 466

7.6 Effects of Reflections 470

7.7 Broadband Measurment Antennas 486

Problems 494

References 501

8 Radiated Emissions and Susceptibility 503

8.1 Simple Emission Models for Wires and PCB Lands 504

8.2 Simple Susceptibility Models for Wires and PCB Lands 533

Problems 550

References 556

9 Crosstalk 559

9.1 Three-Conductor Transmission Lines and Crosstalk 560

9.2 The Transmission-Line Equations for Lossless Lines 564

9.3 The Per-Unit-Length Parameters 567

9.4 The Inductive–Capacitive Coupling Approximate Model 595

9.5 Lumped-Circuit Approximate Models 624

9.6 An Exact SPICE (PSPICE) Model for Lossless, Coupled Lines 624

9.7 Shielded Wires 647

9.8 Twisted Wires 677

Problems 701

References 710

10 Shielding 713

10.1 Shielding Effectiveness 718

10.2 Shielding Effectiveness: Far-Field Sources 721

10.3 Shielding Effectiveness: Near-Field Sources 735

10.4 Low-Frequency, Magnetic Field Shielding 742

10.5 Effect of Apertures 745

Problems 750

References 751

11 System Design for EMC 753

11.1 Changing the Way We Think about Electrical Phenomena 758

11.2 What Do We Mean by the Term “Ground”? 768

11.3 Printed Circuit Board (PCB) Design 805

11.4 System Configuration and Design 827

11.5 Diagnostic Tools 847

Problem 856

References 857

Appendix A The Phasor Solution Method 859

A.1 Solving Differential Equations for Their Sinusoidal, Steady-State Solution 859

A.2 Solving Electric Circuits for Their Sinusoidal, Steady-State Response 863

Problems 867

References 869

Appendix B The Electromagnetic Field Equations and Waves 871

B.1 Vector Analysis 872

B.2 Maxwell’s Equations 881

B.2.1 Faraday’s Law 881

B.2.2 Ampere’s Law 892

B.2.3 Gauss’ Laws 898

B.2.4 Conservation of Charge 900

B.2.5 Constitutive Parameters of the Medium 900

B.3 Boundary Conditions 902

B.4 Sinusoidal Steady State 907

B.5 Power Flow 909

B.6 Uniform Plane Waves 909

B.6.1 Lossless Media 912

B.6.2 Lossy Media 918

B.6.3 Power Flow 922

B.6.4 Conductors versus Dielectrics 923

B.6.5 Skin Depth 925

B.7 Static (DC) Electromagnetic Field Relations— a Special Case 927

B.7.1 Maxwell’s Equations for Static (DC) Fields 927

B.7.1.1 Range of Applicability for

Low-Frequency Fields 928

B.7.2 Two-Dimensional Fields and Laplace’s Equation 928

Problems 930

References 939

Appendix C Computer Codes for Calculating the Per-Unit-Length (PUL) Parameters and Crosstalk of Multiconductor Transmission Lines 941

C.1 WIDESEP.FOR for Computing the PUL Parameter Matrices of Widely Spaced Wires 942

C.2 RIBBON.FOR for Computing the PUL Parameter Matrices of Ribbon Cables 947

C.3 PCB.FOR for Computing the PUL Parameter Matrices of Printed Circuit Boards 949

C.4 MSTRP.FOR for Computing the PUL Parameter Matrices of Coupled Microstrip Lines 951

C.5 STRPLINE.FOR for Computing the PUL Parameter Matrices of Coupled Striplines 952

C.6 SPICEMTL.FOR for Computing a SPICE (PSPICE) Subcircuit Model of a Lossless, Multiconductor Transmission Line 954

C.7 SPICELPI.FOR For Computing a SPICE (PSPICE) Subcircuit of a Lumped-Pi Model of a Lossless, Multiconductor Transmission Line 956

Appendix D A SPICE (PSPICE) Tutorial 959

D.1 Creating the SPICE or PSPICE Program 960

D.2 Circuit Description 961

D.3 Execution Statements 966

D.4 Output Statements 968

D.5 Examples 970

References 974

Index 975

This second edition has been substantially rewritten and revised to reflect the developments in the field of EMC. Chapters have been repositioned and their content revised.
"...well written and flows smoothly...provides electrical engineering students with a new perspective in applied electromagnetics and circuit design...highly recommended." (CHOICE, September 2006)
  • A thorough revision and updating of the very successful 1992 edition
  • The author has designed and introduced the first EMC courses offered in universities. These courses are now offered in all EE departments
  • This edition has a wealth of worked examples and problems
  • The book will be accompanied by a web site offering additional aides for students and instructors
  • EMC standards are set by the government and must be followed for all electronic devices sold in the United States and worldwide
  • An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.