Skip to main content

Advanced Processing and Manufacturing Technologiesfor Structural and Multifunctional Materials VI, Volume 33, Issue 8

Advanced Processing and Manufacturing Technologiesfor Structural and Multifunctional Materials VI, Volume 33, Issue 8

Tatsuki Ohji (Editor), Mrityunjay Singh (Editor), Michael Halbig (Volume Editor), Sanjay Mathur (Volume Editor)

ISBN: 978-1-118-20598-3

Nov 2012

182 pages

In Stock



The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies.

Ceramic Engineering and Science Proceedings 2013 Set

This item: Advanced Processing and Manufacturing Technologiesfor Structural and Multifunctional Materials VI, Volume 33, Issue 8

Advances in Solid Oxide Fuel Cells VIII, Volume 33, Issue 4

(Hardcover $87.95)

Purchased Together:$710.00

Preface vii

Introduction ix

Contribution to the Understanding of the Microstructure of First Generation Si-C-O Fibers 1
Francis Teyssandier, Geraldine Puyoo, Stephane Mazerat, Georges Chollon, Rene Pailler, and Florence Babonneau

The Control of Interphases in Carbon and Ceramic Matrix Composites 11
Gerard Vignoles, Rene Pailler, and Francis Teyssandier

High Volume Production for High Performance Ceramics 25
William J. Walker, Jr.

Low Pressure Injection Molding of Advanced Ceramic Components with Complex Shapes for Mass Production 35
Eugene Medvedovski and Michael Peltsman

Ceramic Injection Molding Using a Partially Water-Soluble Binder System: Effect of Back-Bone Polymers on the Process 53
Oxana Weber and Thomas Hanemann

Green-Conscious Ceramic Injection Molding 63
Oxana Weber and Thomas Hanemann

Shaping of Large-Sized Sputtering Targets 73
Alfred Kaiser

TEM Observation of the Ti Interlayer between SiC Substrates during Diffusion Bonding 81
H. Tsuda, S. Mori, M. C. Halbig, and M. Singh

Joining of Alumina by Using of Polymer Blend and Aluminum 91
Ken'ichiro Kita, Naoki Kondo, Hideki Kita, and Yasuhisa Izutsu

Diffusion Bonding of Rigid Alumina Pieces using Porous Alumina Interlayers 99
Hiroyuki Miyazaki, Mikinori Hotta and Hideki Kita, and Yasuhisa Izutsu

Influence of Joining Pressure and Surface Roughness on Flexural Strength of Joined Boron Carbide Ceramics 105
Kiyoto Sekine, Takeshi Kumazawa, Wu-Bian Tian, Hideki Hyuga, and Hideki Kita

Laser Machining of Melt Infiltrated Ceramic Matrix Composite 113
D. C. Jarmon, G. Ojard, and D. Brewer

Fabrication of Dendritic Electrodes for Solid Oxide Fuel Cells by using Micro Stereolithography 123
Naoki Komori, Satoko Tasaki, and Soshu Kirihara

Ion-Exchange Properties of Nano Zeolite a Prepared by Bead Milling and Post-Milling Recrystallization Method 129
Toru Wakihara, Ryuma Ichikawa.Junichi Tatami, Katsutoshi Komeya, Takeshi Meguro

The Role of Milling Liquids in Processing of Metal-Ceramic-Precursor Powders 135
Nadja Holstein, Katharina Wiegandt, Florian Holleyn, Jochen Kriegesmann, Michael R. Kunze, Joachim Scholz, and Rolf Janssen

Quantitative Validation of a Multi-Scale Model of Pyrocarbon Chemical Vapor Infiltration from Propane 147
G. L. Vignoles, W. Ros, G. Chollon, F. Langlais, and C. Germain

Numerical Analysis of Fracture Behavior in Anisotropic Microstructures 159
Hisashi Serizawa, Seigo Tomiyama, Tsuyoshi Hajima, and Hidekazu Murakawa

Author Index 169