DescriptionHere's the book you need to prepare for the JNCIA exam, JN0-201, from Juniper Networks. Written by a team of Juniper Network trainers and engineers, this Study Guide provides:
- Assessment testing to focus and direct your studies
- In-depth coverage of official test objectives
- Hundreds of challenging practice questions, in the book and on the CD
Authoritative coverage of all test objectives, including:
- Working with the JUNOS software
- Implementing Juniper Networks boot devices
- Troubleshooting Routing Information Protocol
- Implementing a routing policy
- Configuring and monitoring an OSPF Network
- Implementing Border Gateway Protocol
- Monitoring and troubleshooting an IS-IS network
- Understanding the Reverse Path Forwarding process
- Operating firewall filters
- Using Multiprotocol Label Switching
Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Introduction. Assessment Test. Chapter 1 The Components of a Juniper Networks Router. Chapter 2 Interfaces. Chapter 3 Protocol-Independent Routing. Chapter 4 Routing Policy . Chapter 5 The Routing Information Protocol (RIP). Chapter 6 Open Shortest Path First (OSPF). Chapter 7 Intermediate System to Intermediate System (IS-IS). Chapter 8 Border Gateway Protocol (BGP). Chapter 9 Multicast. Chapter 10 Firewall Filters. Chapter 11 Multiprotocol Label Switching (MPLS). Glossary. Index.
3rd Sentence Should read: To assist you in making this transition, let's examine some details of the router's output.
since your interaction with the Packet Forwarding Engine is through the CLI Should read: ... since your interaction with the Packet Forwarding Engine is limited through the CLI and the JUNOS software.
Answer 6 Second sentence should read Scrambling and FCS Value are physical properties.
Near bottom of page, the route prompt should show user@Merlot
First router configuration line should read user@Merlot
Automatic summarization - Should read: This occurs due to the classful nature of RIP as described above.
Should read: ... and injects it into the appropriate area.
First sentence should read: The Cabernet and Shiraz routers are EBGP peers in AS 10 and AS 20, respectively.
Should read: ... and finally arrived in the local AS 64999.
Should read: Assuming a local AS number of 64999, in our earlier ...
Please change 0x01:11:01 into 0x01:10:01
Also change 0x01:00:5E:01:11:01 into 0x01:00:5E:01:10:01
Should read: The default action for an LSR is to copy the IP TTL ...
Should read: The interval is changed on Chardonnay's so-0/0/2.0 interface (10.100.60.2) to 20 seconds:
Discussing Aggregated Routes the book specifies that the most precise summary available to fit this criterion is 192.168.0.0/17 it should read 192.168.0.0/18.
Text output that is included in figure 7.8 -Please change the router capture output from hold time 9 to hold time 27 .
Answer 17 Please change 192.168.0.0 /17 to 172.16.0.0 /17 .